Battery Voltage And Charging Status - Fluid Horizon V2 User Manual

P11/P12 – Changing these settings has a barely noticeable effect. Note that
electric braking can only be felt at faster speeds.
P17 – Cruise control will automatically maintain scooter speed after you
have held the accelerator in place for a few seconds. Deactivated through
accelerator touch or brake. CAUTION: Ride in a position where you can
immediately access the brake to cancel Cruise Control if necessary. ONLY
RECOMMEDED FOR ADVANCED USERS.

BATTERY VOLTAGE AND CHARGING STATUS

The battery voltage display can be accessed by short pressing the power
button – it will appear above the battery symbol indicated with a "V" that
looks like a "U".
The live reading of battery voltage will greatly improve your understanding
of battery health and charging status vs. just looking at the battery bars,
which are just a rough translation of battery voltage. You will see the voltage
fluctuating down (when you accelerate) and up (when you idle) during your
ride.
You will learn over time how to interpret your voltage display to make the
right conclusions about status of battery charge.
The theory is as follows: When your battery is fully charged using the
accompanying 54.6V charger, the display will show 54.6V (+/- 0.5V due to
inaccuracies in measurement). The battery will shut down at 39V as
configured in the display. You will be very close to empty at 42V.
The relationship of charge and voltage reading is NOT linear:
17