Unfolding And Folding - Fluid Horizon V2 User Manual

UNFOLDING AND FOLDING

1. Open the folding lever
2. Lift the front stem upright until it audibly snaps into place with a
clicking sound.
3. If you do not hear the click, push the stem forward
to ensure that the folding mechanism has locked
into place.
4. Fold the handlebars upward and secure them with
the two cuffs (twist as indicated below)
Twist forward
to close
5. Adjust the height of the handlebar by pulling up the
front stem.
6. Fasten the front stem
with the quick release
lever.
Fold your scooter by following the above steps in reverse.
If you find it hard to open the folding lever, push the stem forward to
alleviate pressure from the mechanism. The easiest way to unfold is to put
your right foot on the board, place your right hand in the center of the
handlebars and push forward while using your left hand to open the lever.
10
2
1
Twist backward
to close