Warning: Secure Unfolding; Folding Mechanism Sensitivity Adjustment - Fluid Horizon V2 User Manual

WARNING: Secure Unfolding

Always ensure the folding mechanism has snapped in place before you
ride. The main bolt needs to sit firmly inside its slot:
There is an audible click sound when you fold the scooter up and the bolt
snaps into place. You may need to push the stem forward to secure the
mechanism.

Folding Mechanism Sensitivity Adjustment

If you feel the mechanism is too soft (leads to movement in stem) or too
hard (very difficult to fold and unfold), the sensitivity can be adjusted:
Locate the three screws in front of the board facing the wheel. These screws
regulate the tightness of the folding mechanism via little plastic bumpers on
the other side. If you feel the folding mechanism is too tight or too loose,
you can screw these out (less tight) or in (tighter).
Recommended for ideal set up:
1. Loosen all three screws
2. Fold up the scooter and snap it into place
3. Tighten all three screws lightly
The folding mechanism is perfectly set up
when you need to lightly push forward the
handlebar in order to open the lever or to
snap the bolt into place when folding up.
11