Initial Set Up; Charging And Battery Safety; Charging Your Horizon; Battery Maintenance - Fluid Horizon V2 User Manual

INITIAL SET UP

Your Horizon will be delivered with brake lever and display loose on the
handlebar for more secure shipping. Use the included Allen keys to fasten
the brake and display in the position that best suits your riding style.

CHARGING AND BATTERY SAFETY

Charging your Horizon

• Turn your scooter off
• Connect the charger to the wall
power outlet
• Open the charging port cover
• Connect the charger to the scooter
The LED on the charger will turn red while charging and turn green when the
scooter is ready for use. Remove the charger and cover the plug. Charging
time is 4-6 hours for the 10.4Ah battery and 6-8 hours for the 13Ah battery.

Battery Maintenance

• We recommend you charge your scooter after every use. This is not
required.
• A Li-ion battery is a consumable device. Please, replace with a new
battery once capacity drops below 50% of what you experienced
initially. Contact your place of purchase for a replacement.
• Make sure the battery is charged and that the scooter is turned off
before storing your scooter for extended periods at a time.
• Store your scooter in a dry and cool place. Do not keep it outdoors or in
outdoor sheds for extended periods of time as excessive cold, heat,
sunlight, rain, or other environmental conditions may impact safe
operation and reduce the scooter's lifespan.
• Charge your battery at minimum every 3 months to prevent it from
running completely empty. Once the battery runs completely empty
due to slow discharge while in storage, it may have to be replaced.
12
Plug in
charger here