Royal Sovereign ARP-2214P Manual page 9

INSTALLATION
STEP 1
Connect one end of the exhaust hose to the
window connector and the other end to the hose
connector.
STEP 3
Connect the widow connector to the window
kit. Extend the adjustable hose the length of
your window.
Clockwise
Connect the hose connector to the unit.
Open the window and place the window kit on
the inside edge of the window. Adjust the
window kit to the width/ height of the window.
Once secure, close the window to secure it in
place.
Window width
Note : Depending on the type of window frame,
for some window installations the use of duct
tape may be ideal to better seal the window kit
to attain a better closed seal which will yield
maximum efficiency.
-8-
ARP-2214P
STEP 2
Aligning the bayonet
Insert down
STEP 4
Window height