Royal Sovereign ARP-2214P Manual page 20

ARP-2214P
Transportation, marking and storage for units that employ flammable refrigerants
Transport of equipment containing flammable refrigerants. Attention is drawn to the fact that additional
transportation regulations may exist with respect to equipment containing flammable gas. The maximum
number of pieces of equipment or the configuration of the equipment, permitted to be transported together will
be determined by the applicable transport regulations.
Marking of equipment using signs
Signs for similar appliances used in a work area generally are addressed by local regulations and give the
minimum requirements for the provision of safety and/or health signs for a work location. All required signs are
to be maintained and employers should ensure that employees receive suitable and sufficient instruction and
training on the meaning of appropriate safety signs and the actions that need to be taken in connection with
these signs. The effectiveness of signs should not be diminished by too many signs being placed together.
Any pictograms used should be as simple as possible and contain only essential details.
Disposal of equipment using flammable refrigerants
See national regulations.
Storage of equipment/appliances
The storage of equipment should be in accordance with the manufacturer's instructions.
Storage of packed (unsold) equipment
Storage package protection should be constructed such that mechanical damage to the equipment inside the
package will not cause a leak of the refrigerant charge. The maximum number of pieces of equipment permitted
to be stored together will be determined by local regulations.
-19-