Royal Sovereign ARP-2214P Manual page 7

UNPACKING
Accessories Included:
Exhaust hose
Hose connector
Window connector
Important :
To prevent damage after moving, unpack the unit and let the unit stand upright
for a minimum of 2 hours. If the unit was accidentally placed on its side, allow the unit to
set up right for at least 24 hours before use.
PLACEMENT
1. Place the unit on a firm, level surface in an area with at least 12" (30cm) of free space
around it to allow for proper air circulation. The electrical outlet used should be in accordance
with the local electric safety requirements.
2. Do not operate in close proximity to walls, curtains, or other objects that may block the units
air inlet and outlet.
3. Keep the air inlet and outlet free of obstacles.
Never install the unit where it could be subject to:
• Heat sources such as radiators, heat registers, stoves or other products that products that
produce heat.
• Direct sunlight.
• Mechanical vibration or shock.
• Excessive dust.
• Lack of ventilation, such as next to a cabinet or bookcase.
• Uneven surface
Remote control (battery included)
Window kit
Hose
(used for continuous drainage option)
-6-
ARP-2214P