Flipping The Projected Image Horizontally (Mirror Mode) - Casio CX-E1 User Manual

5.
After the settings are the way you want, press the [MENU] key.
Note
 The operation below can be performed using the remote controller.
– Press the [FUNC] key. Use the menu that appears in the projection image to select a color
mode as in step 3 of the above procedure, and then perform step 4 and 5.

Flipping the Projected Image Horizontally (Mirror Mode)

The projector's Mirror Mode flips the projected image horizontally.
1.
Display the Setup Menu (page 50).
2.
Use the [] and [] keys to select "Screen Settings" and then press the [ENTER]
key.
3.
Use the [] and [] keys to select "Mirror" and then press the [ENTER] key.
 This closes the menu and flips the image.
 A Mirror Mode icon will be in the upper right corner of the projection image while the projector
is in the Mirror Mode.
4.
To exit the Mirror Mode, press the [ESC] key.
 Pressing one of the following keys while in the Mirror Mode will exit the Mirror Mode and
perform the key's function: [P], [MENU], [], [].
Note
 Pressing one of the remote controller keys below will execute the corresponding function
without exiting the Mirror Mode.
All Models:
Network model only: [VOLUME +], [VOLUME –]
 Pressing one of the remote controller keys below while in the Mirror Mode will exit the Mirror
Mode and perform the key's function.
All Models:
Network model only: [INPUT]
 The projector exits the Mirror Mode automatically whenever a low battery warning (page 32)
appears.
[BLANK], [FREEZE], [D-ZOOM +], [D-ZOOM –]
[ESC], [P], [MENU], [], [], [KEYSTONE +], [KEYSTONE –],
[ ], [TIMER], [ASPECT], [FUNC]
53