Error Indicators And Warning Messages - Casio XJ-S43W User Manual

Error Indicators and Warning Messages

Warning messages and indicators let you know what the problem is when a projector error
occurs.
When an error occurs, wait until cool down is complete and the fan stops before unplugging
the AC power cord. If you unplug the AC power cord while the fan is still operating, an
error may occur when you plug the AC power cord back in.
* For further information about items whose reference pages are marked with an asterisk,
see "User's Guide (Basic Operation)".
Indicator/Error Message
POWER : Green steady
TEMP : –
LAMP : –
Message : Internal temperature is
too high. Check
projector air vents for
blockage.
POWER : Amber flashing
Amber steady
TEMP : Red flashing
(1-second interval)
Turns off
LAMP : –
Message : Internal temperature is
too high. The projector
will turn off.
POWER : Amber flashing
Red steady
TEMP : Red flashing (0.5-second
interval)
LAMP : –
Message : –
POWER : Green steady
TEMP : –
LAMP : –
Message : The projector has a
history of turning off
due to high temperature.
Check air vents for
blockage.
Description and Required Action
The projector's internal temperature is very high. Press the [ESC] key
to clear the warning message and perform the following steps.
1 Check for any blocking of the projector's intake vents and exhaust
vents, and make sure that there is sufficient space around the
"
projector. See Setup Precautions" (page E-13*).
2 If there is dust accumulated around the intake vents and/or
exhaust vents, turn off the projector and remove it. See
the Projector" (page E-22*).
Power has turned off automatically due to internal overheating.
Perform the following steps.
1 Check for any blocking of the projector's intake vents and exhaust
vents, and make sure that there is sufficient space around the
"
projector. See Setup Precautions" (page E-13*).
2 If there is dust accumulated around the intake vents and/or
exhaust vents, remove it. See
E-22*).
If there is no problem with the projector's vents, confirm that the
POWER/STANDBY indicator is lit amber (without flashing), and then
turn power back on again. If the error occurs again when you turn
power back on, contact your retailer or nearest authorized CASIO
Service Center.
Power has turned off automatically due to internal overheating. This
causes a dialog box containing the text in the next item below to
appear the next time you turn on the projector. Follow the steps that
are provided.
The last time you were using the projector, power turned off
automatically due to internal overheating. Press the [ESC] key to
clear the warning message and perform the following steps.
1 Check for any blocking of the projector's intake vents and exhaust
vents, and make sure that there is sufficient space around the
"
projector. See Setup Precautions" (page E-13*).
2 If there is dust accumulated around the intake vents and/or
exhaust vents, turn off the projector and remove it. See
the Projector" (page E-22*).
3 Disconnect the power cord from the projector and wait for all of
the projector's indicators to go out. Next, reconnect the power cord
and turn the projector back on. If the error occurs again when
you turn power back on, contact your retailer or nearest authorized
CASIO Service Center.
42
"
Cleaning the Projector" (page
"
Cleaning
"
Cleaning