Nokia 6210 Quick Manual page 2

Figure 2. Number and codes.
Choosing the Finish button will close the setup and create an icon for the dial-up networking folder (Figure 3).
Figure 3. Finishing the creation of a new connection.
Click the newly created icon with the right button of the mouse and choose Properties. This will open a general
information box for this connection (Figure 4). (NOTE: If you are going to connect to an ISDN number you must add
the following line to the extra settings option: S35=0. This can be done by choosing Configure... à à à à Connection à à à à
Advanced... à à à à Extra settings). If you want to change this connection to a "normal" line please remember this. The
same procedure applies if you want to use a 14.4-Kb/s data line, only the AT command is different. To enable the
transmission of 14.4 Kb/s data please type +CBST=14 instead of S35=0.
Copyright ã 1995 - 2000. Nokia
All rights reserved. 2(7)
.