Default Parameters - Ebyte NB114 User Manual

Hide thumbs Also See for NB114:

Table of Contents

Chengdu Ebyte Electronic Technology Co., Ltd.

（1） Turn off the firewall and antivirus software of the computer;

（2） Configure the network card connected to the device;

（3） This case is for the test of direct connection of the equipment to the computer. The

computer needs to be configured as static IP (the computer is directly connected to the serial

port server, there is no router to assign, and the computer cannot obtain the IP address). The

use of a switch or router needs to ensure that the equipment and the computer are on the

same network end (for example, 192.168.3. xxx);

（4） The static IP of the computer is 192.168.3.4 (the same network segment as the serial

port server), the subnet mask is 255.255.255.0, and the default gateway is 192.168.3.1.

2.3.2.Default parameters

project

IP address

Default local port

Subnet mask

Default gateway

Default working mode

Default parameters

192.168.3.7

8887

255.255.255.0

192.168.3.1

TCP Server

NB114 User Manual

Table of Contents