Fujitsu AU G18LVLB Series Design & Technical Manual page 207

SWITCHING SELECTION OF FUNCTION SETTING MODE
„ „
2) To activate the function setting mode, hold down the three buttons of SET TEMP. q , SET
TEMP. p and FAN at the same time for 5 seconds or longer.
BUTTON NAME AND FUNCTION
„ „
● During function setting mode, indoor unit reject the any operation command from remote
controller.
Function number
Refer to FUNCTION DETAILS
Remote controller address
Remote controller address
setting number 00-15.
FAN button
Each time this button is
pressed, the fan setting
changes among "Remote
controller address," "Function
number" and "Setting number."
Function setting mode initial display
- (04-65) -
Setting number
Refer to FUNCTION DETAILS
START/STOP button
Transmits function setting
SET TEMP. " " and "q" button
p
Switches the various numbers.