Fujitsu AU G18LVLB Series Design & Technical Manual page 204

FUNCTION SETTING
„ „
3) Select the [Function No.] with pressing the [Cursor button (Left/Right)], and select the
Function No. to be set with pressing the [Cursor button (Up/Down)].
4) Select the [Setting No.] with pressing the [Cursor button (Left/Right)], and select the Setting
No. to be set with pressing the [Cursor button (Up/Down)].
5) Pressing the [Enter button], confirm the setting.
(The data will be transferred to the indoor unit.)
Function setting
R.C. Function
address No.
00 30
Cancel: OK:
Version
● When the data was not set up on the indoor
unit (-- is displayed.)
● Set up the data again according to the
procedure in step 3), 4) above.
FUNCTION DETAILS
„ „
Refer to 6-6. FUNCTION DETAILS
ERROR
Mo 10:00AM
Setting
No.
- -
Error history
When the data was normally set up on the indoor
unit
(Flashing display changes to illuminated display.)
- (04-62) -
Function setting
Mo 10:00AM
R.C. Function Setting
address No. No.
00 30
Cancel: OK:
Version Error history
Function setting
R.C. Function Setting
address No. No.
00 30
Cancel: OK:
Version Error history
Function setting
R.C. Function Setting
address No. No.
00 30
Cancel: OK:
Version Error history
GOOD
Function setting
R.C. Function Setting
address No. No.
00 30
Cancel: OK:
Version Error history
00
Mo 10:00AM
01
Mo 10:00AM
01
Mo 10:00AM
01