DC/AC Inverter
PWS series
User Manual
Page 8 (24)
2.4 Front view, operating and indicator elements
Handle
ON/OFF switch S1
Figure 3) - Front view PWS-F
The PWS is equipped with the following seven LED indicators:
OPERATION
o
Vout
o
Vin>
o
Vin<
o
ERROR
o
OVERLOAD/TEMP.>
o
COLL. FAILURE
o
At the bottom of the LED indicators a potentiometer in combination with a testjack is placed.
With the potentiometer the AC output voltage can be fine adjusted while the voltage value can be
measured at the testjack.
The voltmeter indicates the AC output voltage, the ammeter indicates the AC output current.
With the switch S1 the inverter can be switched ON /OFF.
NOTE: For more information about the indicator and operating elements read the following sections.
ELTEK VALERE INDUSTRIAL ©2008
Ammeter
(I
)
out
LED display with po-
tentiometer and test-
jack
Voltmeter
Cooling-air intake
(V
)
out
UM_PWS_E_R1.2