Eltek Valere PWS Series User Manual page 2

DC/AC Inverter
PWS series
User Manual
Page 2 (24)
Notes to this manual
ATTENTION! Read this manual carefully before installing and commissioning the module.
This manual is a part of the delivered module. Familiarity with the contents of this manual is
required for installing and operating the module.
The rules for prevention of accidents for the specific country and the general safety rules in
accordance with IEC 364 must be observed.
The function description in this manual corresponds to the date of publishing.
Technical changes and changes in form and content can be made at any time by the manufacturer
without notice. There are no obligations to update the manual continually.
The module is manufactured in accordance with applicable DIN and VDE standards such as VDE 0106
(part 100) and VDE 0100 (part 410). The CE marking on the module confirms compliance with EU stan-
dards 2006-95-EG (low voltage) and 89/339 EWG (electromagnetic compatibility) if the installation and
operation instructions are followed.
Supplier:
ELTEK VALERE INDUSTRIAL GmbH
Schillerstraße 16
D-32052 Herford
+ 49 (0) 5221 1708-210
FAX + 49 (0) 5221 1708-222
Email Info.industrial@eltekvalere.com
Internet http://www.eltekvalere-industrial.com
© Copyright ELTEK VALERE INDUSTRIAL 2008. All rights reserved.
ELTEK VALERE INDUSTRIAL ©2008 UM_PWS_E_R1.2