Electrical Connectors Pws-W; Figure 5) - Screw Terminals Pws-W - Eltek Valere PWS Series User Manual

DC/AC Inverter
PWS series
User Manual
Page 11 (24)

2.5.2 Electrical connectors PWS-W

The electrical connectors (screw terminals, see Figure 5) for a sample) are located at the bottom of the
module. They are accessible after opening the front door. The wires are to be inserted through the
grommets at the bottom and connected to the screw terminals according to the following table.

Figure 5) - Screw terminals PWS-W

Figure 5) shows a sample. The genuine screw terminals may look a little bit different depending on the
PWS type.
Terminal/designation
X1
+
-
X2
1
2
PE
X3
1
2
3
4
5
6
*
No collective failure is existent: COM and NO are closed.
*
Collective failure is existent: COM and NC are closed.
ELTEK VALERE INDUSTRIAL ©2008
Function
DC input
+
-
AC output
L
N
PE
Signals
*
coll. failure: COM
*
coll. failure: NO
*
coll. failure: NC
SYNC-GND
SYNC-SIG
SYNC-STAT
UM_PWS_E_R1.2