Table of Contents
Advertisement
DC/AC Inverter
PWS series
User Manual
Page 5 (24)
1. Safety instructions and waste disposal rules
Because several components of operating electrical devices are charged by dangerous voltage, the
improper handling of electrical devices may be the cause of accidents involving electrocution, injury,
or material damages.
•
Operation and maintenance of electrical devices must be performed by qualified skilled
personnel such as electricians in accordance with EN 50110-1 or IEC 60950.
•
Install the module only in areas with limited access to unskilled personnel.
•
Before starting work, the electrical device must be disconnected from mains. Make sure that it
is earthed.
•
Do not touch connector pins as they can be charged with dangerous voltage up to 30 seconds
after disconnection.
•
Only spare parts approved by the manufacturer must be used.
All electric devices must be disposed of separate from domestic waste at collecting points that have
been set up by the government or municipal authority.
"Separate collection is the precondition to ensure specific treatment and recycling of WEEE and is
necessary to achieve the chosen level of protection of human health and the environment in the
Community."
The above statement from EU directive 2002/96/EC applies to all electric devices installed within
EU countries.
In countries outside the EU, different rules may apply regarding waste disposal of electric devices.
For more information about waste disposal of your discarded equipment, contact your
ELTEK VALERE INDUSTRIAL partner.
ELTEK VALERE INDUSTRIAL ©2008
Warning!
UM_PWS_E_R1.2
Advertisement
Table of Contents
