Usb Configuration - Avalue Technology ARC-1535 Quick Reference Manual

ARC-1535
Item
Console Redirection
Console Redirection EMS

3.6.2.10 USB Configuration

The USB Configuration menu helps read USB information and configures USB settings.
Item
XHCI Hand-off
USB Mass Storage Driver Support
USB transfer time-out
Device reset time-out
Device power-up delay
Mass Storage Devices
58 ARC-1535 Quick Reference Guide
Options
Disabled[Default],
Console Redirection Enable or Disable.
Enabled
Disabled[Default],
Console Redirection Enable or Disable.
Enabled
Options
This is a workaround for OSes without XHCI
Enabled[Default],
hand-off support. The XHCI ownership change
Disabled
should be claimed by XHCI driver.
Disabled Enable/Disable USB Mass Storage Driver
Enabled[Default], Support.
1 sec
5 sec The time-out value for Control, Bulk, and
10 sec Interrupt transfers.
20 sec[Default]
10 sec
20 sec[Default] USB mass storage device Start Unit command
30 sec time-out.
40 sec
Maximum time the device will take before it
properly reports itself to the Host Controller.
Auto[Default]
'Auto' uses default value: for a Root port it is
Manual
100ms, for a Hub port the delay is taken form
Hub descriptor.
Mass storage device emulation type. 'AUTO'
Auto[Default]
Description
Description