Front Plate (L) Sub Assy (Dr1) (L-Ch) - Sony MDR-ZX770BN Service Manual

2-4.

FRONT PLATE (L) SUB ASSY (DR1) (L-ch)

– L-ch
Note: When installing the front plate (L)
sub assy, align three holes of front
plate (L) sub assy with three screw
holes of housing (L) block.
housing (L) block
6 Remove two wires
7 Remove the solder.
battery adhesive
1 Peel off the
battery adhesive.
–
2 NFC module block
3 screw
from the claw.
[natural]
[natural] [red]
ditch claw
MDR-ZX770BN/ZX770BT/ZX780DC
h
NFC module block
(RC-S711)
guide line
guide line
(RC-S711)
5 Remove the front plate (L) sub assy
in the direction of the arrow.
7 Remove the solder.
[red]
MAIN board
driver cable
c -
NFC module block
(RC-S711)
8 front plate (L) sub
assy (DR1)
4 three screws
7