2-8.
CAP HOUSING (R) SUB ASSY (R-ch)
1 Set the cap housing (R)
sub assy facing up.
–
R-ch
–
Note 2: Insert the jig from here.
4 Remove the cap ring and
cap housing (R) sub assy
in the direction of the arrow.
(ZX770BN/ZX780DC)
Note 1: When using a jig, please work
so as not to injure cap ring.
cap ring
total four claws
3 All claws are removed while moving jig
2 Insert the jig into the cap housing (R)
sub assy and raise it.
jig
MDR-ZX770BN/ZX770BT/ZX780DC
JIG
When disassembling the unit, use the following jig.
Part No.
Description
9-913-402-33
TOOL FOR DISASSEMBLING
in the direction of the arrow, and cap
housing (R) sub assy is removed.
Note 3: When installing the cap housing (R) sub assy,
align four claws of cap housing (R) sub assy
with four holes of front (R) plate.
6 cap housing (R) sub assy
(ZX770BN/ZX780DC)
5 cap ring
Note 4: When installing the cap ring,
align three pins of cap ring with
three holes of front (R) plate.
Ver. 1.1
11