Installation - Blue Sea EVOLUTION G47 Service Manual

Fitting of Adjustable Feet / Rear Rollers to the Pasta Cooker
This appliance rear leg mount housings can be fitted with:-
Adjustable feet to assist with levelling of the appliance on uneven floors.
Rear rollers to enable the appliance to be easily moved for positioning and cleaning purposes.
Rear Adjustable Legs, fitting:-
1. Raise the appliance from the floor by approximately 75mm using
suitable lifting equipment (i.e. Palletiser / Forklift) to allow the rear
rollers to be removed.
2. Unscrew and remove the securing bolt that secures the rear roller
to the rear leg housing.
3. The rear rollers will drop freely from the rear leg housings.
4. Screw the rear adjustable feet into the rear leg housings and
tighten hand tight.
5. Lower the appliance back to the floor and adjust the adjustable feet
to level the appliance.
Rear Rollers, fitting:-
1. Raise the appliance from the floor by approximately 75mm using
suitable lifting equipment (i.e. Palletiser / Forklift) to allow the rear
adjustable feet to be removed.
2. Unscrew and remove both the rear adjustable feet from the rear
leg housings.
3. Fit the rear roller to the rear leg housing and align the screw hole in
the side of the rear leg housing with the threaded hole in the rear
roller.
4. Locate the rear roller to the leg support with the bolt supplied and
tighten the bolt using a 10mm A/F spanner.
5. Fit the second roller and tighten.
6. Lower the appliance back to the floor and adjust the front
adjustable feet to level the appliance.
Blue Seal Evolution Series - G47 Gas Pasta Cooker
Amendment 6
Rear Leg
Housing
7

Installation

Roller Securing
Adjustable Rear
Foot Roller
© Copyright Moffat Ltd, March 2016
2
Fig 2.1
Bolt