•
Secure the air filter cover with a screw again.
•
Remove the screw from the handle, insert the other side of the flexible shaft into the handle and use
the screw to affix it to the handle.
•
Use cable ties to affix the accelerator cable to the flexible shaft.
b. Mounting the tube
•
Pull out the locking pin (a) and press the lower part of the shaft (b) downward until the locking pin
engages. The bolt (a) is in the right position when it is fully seated in the bore.
•
Lastly, tighten the knob (d) securely.
18