Service Manual
6. Remove the right side panel (2 screws from terminal block and 9 screws from
right side panel).
Figure 97
8 8 |
9.1.2 Removing the fan assembly
1. Stop operation of the system and turn "OFF" the power at the disconnect.
2. Remove the top cover, right side panel and front panel following Section
3. Remove the hex nut that is fixing the fan.
Screws of
terminal board
Screws of
Figure 98
right side
board
4. Remove the fan.
5. Remove the four fixing screws of the fan motor, then remove the fan motor.
Figure 99
Bosch Climate 5000 Series Ductless Air Conditioner / Heat Pump Multi Zone Outdoor Units (01.2023)
9.1.1.