Quick CHC 1202 M User Manual page 51

FREE FALL
SET VALUE:
0,5 s
FREE FALL
ATTENTION: auto free fall management must be activated exclusively with windlasses equipped
with auto free fall system. Refer to the instruction manual relative to the windlass being used.
ATTENTION: If auto free fall management is activated, the "no sensor" signal time will vary
depending on the value entered in the AUTO FREE FALL parameter and the automatic descent
function will be deactivated; the latter will become active again once free fall management is
deactivated.
CHC1202M IT GB - REV005B
SETTING THE CHAIN COUNTER
SETTINGS MENU - CALIBRATION
AUTO FREE FALL
Through this management we set the time required by the windlass
auto free fall system to deactivate itself.
Select the available values: OFF, from 0.1s to 7s. (default: OFF)
Increase
Decrease
Confirm value and go back to CALIBRATION menu.
CHAIN UP
SPEED 20 M / M
0.1s - 7s
GB
SET SAIL
51