Table of Contents
Advertisement
7. ERROR MESSAGES
Data Error Message
The data error message appears whenever the Digital Diary's internal check discovers a problem with
data stored in memory.
Appearance of the data error message indicates that you must perform the all-reset procedure to
correct the problem. Start out with the procedure under "To start the all-reset operation" on page 6,
and continue with the procedure under "When to press
Important!
• Even though you are not using the unit for the first time, you must press
asks "
the unit after a data error occurs.
If you still have trouble after trying the
Message Table
Message
.
(NOT FOUND!
PRESS
.
(MEMORY FULL, PRESS
ANY KEY.)
(ALARM TIME COINCIDENT!)
(ALARM TIME ALREADY
PASSED!)
.
(DATA COMM. ERROR,
PRESS ANY KEY)
Data specified in search operation
does not exist in memory.
TO QUIT.)
,
No more room in memory for stor-
age of data.
Attempt to set an alarm that is al-
ready used for another entry.
Attempt to set an alarm for a time
or data that is already passed.
Error during data communica-
tions.
— 14 —
for "Yes" on page 6".
operation, you may have a hardware problem.
Meaning
Change specification or cancel
search.
Delete unnecessary data items
from memory.
Set a different alarm time or
change the existing alarm time.
Set a different alarm time.
Cancel the operation and try
again.
(for "Yes") when the unit
(
)" in order to reset
Action
Advertisement
Table of Contents
