Step 7. Fit the remaining BASE STONE (F) into the notches of the 2 SIDE
STONES (G).
Step 8. Place the STONE SUPPORTS (C) across the HOUSING (A) and secure
with SCREWS and WASHERS. Adjust the Stone Support Brackets (D) to the
C
D
D
suitable place.
C
A
A
Step 9. Turn the Pizza Oven Box cover and carefully place on FIRBOX (K).
NOTICE: remove all stickers before placing on FIREBOX.
NOTE: Before using your Pizza Oven Box for the first time, wipe the base
stone with a damp cloth to remove any packaging debris.
Step 10. Remove the screw on the right of control panel, then install the
match lighter(I), and tighten the screw.
I
Pizza Turner Assembly
Step 1. The Pizza Turner requires assembly prior to use. Locate the PIZZA
TURNER HANDLE (L) and PIZZA TURNER BODY (M) in the Accessory Kit box.
7