Pre-Use Safety Checks - BakerStone B-AJLXX-O-000 Product Manual

Pre-Use Safety Checks

Before first use and after each time the LP gas cylinder is reconnected or changed the LP gas Leak
Test must be performed.
Check all components for proper assembly and function.
Ensure folding legs are rotated to their fully open position [see Figure-5].
Legs folded
(OK for storage and transport only)
Place the appliance outdoors on a secure, stable, non-combustible, and level surface.
Ensure all surfaces including firebox and grease tray are clean prior to each use of the Pizza Oven
Box.
WARNING: Failure to follow these instructions could result in fire, explosion or burn hazard which
could cause property damage, personal injury or death.
Step 3. Listen for any hissing sounds. WARNING: If hissing sounds
are present turn off the gas valve and contact a licensed gas repair
specialist.
Step 4. Spray a mild soapy water solution on all gas connections.
Inspect all connections for the growing presence of bubbles [see
Figure-4]. These bubbles represent a leak. If a leak is present, turn off
the gas, tighten the fitting and test again with the soapy water
solution. WARNING: If bubbles remain present turn off the gas valve
and contact a licensed gas repair specialist.
Figure-5
11
Legs open / Unfolded