Computherm Q3RF Operating Instructions Manual page 16

The factory default temperature is 18 °C for the economy
position and 20 °C for the comfort ( ☼ ) position. These default
temperatures can be changed as follows:
•
Move the switch according to the temperature you would
like to change (economy
•
Press the
"ROOM" disappears, the notice "SET" (adjusted value)
appears in the bottom right corner of the display. Meanw-
hile, the temperature value shown on the display swit-
ches from room temperature to the default temperature
(18.0 °C/20.0 °C) or to the last set temperature (this tem-
perature is blinking on the display). By pressing the but-
tons repeatedly or continuously (the change in values is
accelerated), the desired temperature to be maintained
at the place where the thermostat has been installed can
be set in steps of 0.5 °C.
•
Approximately 6 seconds after setting the room tempera-
ture to be maintained, the device automatically switches
to normal mode. The notice "SET" disappears from the
or comfort ( ☼ )).
( )
w
or button, after which the notice
- 16 -
( )
w