Table of Contents
Advertisement
ABOUT REPAIRING THE BOARD
The mounted parts of this unit that have each board cannot replace
with single.
When each boards are defective, replace the part including the
board.
1. SERVICING NOTES
NOTES FOR FLEXIBLE BOARD
Make sure that the conductive side of a fl exible board does not have
any stain or foreign materials.
Do not touch the conductive side of fl exible boards with bare hands.
Plug in a fl exible board straight, fully into the connector until it
reaches the end inside. (Fig. 1, Fig. 2, Fig. 3)
•
Make sure that the fl at cable and fl exible board are not cracked
or bent at the contact end.
•
Do not apply excessive force to the gilded fl exible board.
3
OK
(The flexible board was plugged in straight
and completely)
Flexible
Board
Reference
line
Connector
Connector
Fig. 1
NG
(The flexible board was plugged in
crooked)
Flexible
Board
Reference
line
Connector
Connector
Fig. 2
NG
(The flexible board was not plugged in
completely)
Flexible
Board
Reference
line
Connector
Connector
Fig. 3
Cut and remove the part of gilt
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
XLR-K3M
Flexible
Board
Flexible
Board
Flexible
Board
SYS SET
Advertisement
Table of Contents
