Sony XLR-K3M Service Manual page 10

2-8. REAR SW SUB ASSY, REAR SW COVER SUB ASSY
1 three tapping screws
(M1.7 5)
rear side
6 Open the rear SW
cover sub assy.
7 Push the rear SW cover sub assy
in the direction of the arrow, and
remove the two shafts from the
two grooves.
top side
right side
USB
connector
hole
shaft
groove
groove
boss
boss
hole
hole
3 Lift up the rear SW sub assy in the
direction of the arrow, and remove
the USB connector from the hole.
4 Remove the rear SW sub assy
in the direction of the arrow.
8 Remove the rear SW cover sub
assy in the direction of the arrow.
shaft
9 rear SW cover sub assy
10
XLR-K3M
2 Slant the rear SW sub assy in the
direction of the arrow, and remove
the two bosses from the two holes.
5 rear SW
sub assy
SYS SET