Safety Cable - ADJ ENCORE BURST UV IP User Manual

I N S TA L L AT I O N
OMEGA BRACKETS
If mounting the truss clamp to an Omega Bracket, insert the posts of the Omega Bracket into
the matching holes on the Scissor Yoke. Secure the Omega Bracket by turning each quick-lock
fastener ¼-turn clockwise; making sure the fasteners are completely locked.
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE
IN A SUSPENDED ENVIRONMENT TO ENSURE THAT THE FIXTURE WILL NOT
MOUNTING THE FIXTURE ON A TRUSS USING CLAMPS WITH OMEGA BRACKETS
When mounting the fixture to a truss, be sure to secure an appropriately rated professional
grade rigging clamp to the the center hole of the Scissor Yoke, or the center hole of the
included Omega Bracket, using an M10 or M12 screw. The fixture provides built-in rigging
point for a SAFETY CABLE (not included). Be sure to only use the designated rigging points for
the safety cable and never secure a safety cable to a carrying handle.
OMEGA BRACKET
CLAMP
5.35" (136mm)

SAFETY CABLE

RIGGING POINT
SAFETY CABLE:
FALL IF THE CLAMP FAILS.
13
SAFETY CABLE
(Not Included)