Ei Electronics Ei Ei161RC Installation Instructions Manual page 16

B16008-R0-160RC SERIES-U&C
230V~ SMOKE & HEAT ALARMS
ALKALINE PRIMARY BATTERY BACK-UP
Ei141 - Ionisation
RECHARGEABLE LITHIUM CELL BACK-UP
Ei161RC - Ionisation
INSTALLER INSTRUCTIONS
IDEALLY INSTALL IN THE CENTRE OF CEILING
AT LEAST 300mm FROM LIGHT FITTINGS
LOCATE IONISATION ALARMS AWAY FROM
KITCHENS TO PREVENT NUISANCE ALARMS
INTERCONNECT ALL ALARMS
ENSURE LIVE MAINS IS CORRECTLY
CONNECTED TO L TERMINALS ON ALL
INTERCONNECTED ALARMS - OTHERWISE
UNITS WILL BE DAMAGED
DO NOT FIT ACTUAL ALARM UNTIL ALL
BUILDING WORK IS COMPLETED TO AVOID
CONTAMINATION. AFTER CHECKING
OPERATION, COVER SMOKE ALARM WITH
DUST COVER UNTIL REQUIRED FOR USE
DISCONNECT THE ALARM BEFORE APPLYING
HIGH VOLTAGE INSULATION TESTS TO WIRING
DO NOT ATTEMPT TO OPEN THE ALARM AS
IT IS PERMANENTLY SEALED FOR SAFETY
P/N B16008 Rev0
17/1/07 11:13 AM
Ei144 - Heat Ei146 - Optical
Ei164RC - Heat Ei166RC - Optical
© Ei Electronics 2006
Page 16