SPEEDLINK SL-890009-BK - Stereo Speaker Manual
![]()
How to use
- Charge the speaker by connecting it to a USB power source (min. 500mA) using the micro- USB charging cable. During charging (approx. 2.5 hours), the LED will glow red. Be aware that the initial charge may take a little longer. As soon as the LED goes out, the charging process is complete and you can disconnect the cable.
![SPEEDLINK - SL-890009-BK - How to use - Step 1 - Charge the speaker How to use - Step 1 - Charge the speaker]()
- Switch the speaker on ('ON') – the front LED will flash blue quickly to indicate the connection readiness.
![SPEEDLINK - SL-890009-BK - How to use - Step 2 - Switch the speaker on How to use - Step 2 - Switch the speaker on]()
- Pair your smartphone or tablet to the speaker ('SPEEDLINK JUKX) via BLUETOOTH process differs depending on the device. If requested, enter the code 0000. The LED behind the grill will now slowly flash blue. The connection will be re-established automatically after switching the devices off and back on again (be aware that this process can take approx. 20 seconds).
![SPEEDLINK - SL-890009-BK - How to use - Step 3 - Pair your smartphone How to use - Step 3 - Pair your smartphone]()
- Alternatively, connect the speaker to an audio source using the audio cable (3.5mm).
![SPEEDLINK - SL-890009-BK - How to use - Step 4 How to use - Step 4]()
- The speaker buttons control playback and telephone functions. Refer to the table for additional button functions. Be aware that some of these functions are only available when connected via BLUETOOTH ®.
Function* | Button operation |
Increase volume | Press repeatedly |
Decrease volume | Press repeatedly |
Play/pause | Press (music playback) |
Next track | Press (music playback) |
Previous track | Press (music playback) |
Answer call | Press (incoming call) |
Decline call | Press and hold for 3s (incoming call) |
End call | Press (in a call) |
Redial | Press and hold for 3s |
* Device dependent; some functions only available in Bluetooth
- To switch to memory card mode, insert a micro- SD memory card into the memory card slot as shown. The speaker will switch automatically to memory card mode and play back the audio files on the micro-SD card. The micro-SD card must be formatted as FAT/FAT32 and contain MP3, WMA or WAV files.
![SPEEDLINK - SL-890009-BK - How to use - Step 5 - To switch to memory card How to use - Step 5 - To switch to memory card]()
- As soon as you hear a warning sound, you notice a drop in performance or the device switches itself off automatically, recharge the speaker. If you do not intend to use the speaker, simply switch it off ('OFF') to save power.
![SPEEDLINK - SL-890009-BK - How to use - Step 6 How to use - Step 6]()
TECHNICAL SUPPORT
Having technical problems with this product? Get in touch with our Support team – the quickest way is via our website: www.speedlink.com.
© 2015 Jöllenbeck GmbH. All rights reserved. SPEEDLINK, the SPEEDLINK word mark and the SPEEDLINK swoosh are registered trademarks of Jöllenbeck GmbH. The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Jöllenbeck GmbH is under license.
All trademarks are the property of their respective owner. Jöllenbeck GmbH shall not be made liable for any errors that may appear in this manual. Information contained herein is subject to change without prior notice. Please keep this information for later reference.
JÖLLENBECK GmbH, Kreuzberg 2, 27404 Weertzen, GERMANY
![]()
![]()
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download SPEEDLINK SL-890009-BK - Stereo Speaker Manual
Need help?
Do you have a question about the SL-890009-BK and is the answer not in the manual?
Questions and answers