NEC UNIVERGE NEAX 2000 IPS System Manual page 15

Method of origination operation
PBX originates a call with LCR Number Development.
Holding/Transferring features
Holding/Transferring features are not available with SIP method.
Setting Ringing Tone
The ringing tone for SIP transmission can be set by CM08>649.
NOTE:
All the types of the called numbers are handled similarly on the PBX. When you want to dis-
criminate between the called numbers which are recognized as representative numbers on such
an upper SIP server and the called numbers which are recognized as DID numbers, assign an
appropriate terminating system to each called number. E.g. Fragmented IP packet receiving for
representative numbers, Direct Inward Dialing (DID) for station terminating.
CHAPTER 1 GENERAL INFORMATION
– 9 –
SERVICE FEATURES
NWA-011436-001 Rev.3.0
9ych1001.fm