Page 1
IX240 Film Adapter IA-20 Reference Manual...
Page 2
The information contained in this manual is subject to change without notice. • Nikon has made every effort to produce a perfect manual, but should you find any mistakes, we would be grateful if you would kindly let us know. The address of the Nikon representative in your area is provided separately.
Page 3
Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Nikon Corporation may void the user’s authority to operate the equipment. Notice for customers in Canada...
Contents Overview ... 5 Parts and Accessories ... 6 Package Contents ... 6 Parts of the IA-20 ... 6 Installation ... 7 Using the IA-20 ... 9 Inserting film ... 9 Removing film ... 11 If You Should Notice Anything Unusual ... 11 Maintenance ...
IX240 film can be previewed and selected frames scanned either singly or all at once. Like the other adapters for the LS-2000, the IA-20 can be inserted while the scanner is on and connected to a computer.
This chapter lists the items packaged with your adapter and identi- fies the parts of the IA-20. 2.1 Package Contents Purchasers of the IA-20 should find that the package contains all the items listed below. Should you find that anything is missing or damaged, contact your retailer immediately.
3. Installation Before installing the IA-20, make sure that your scanner is set up as described in the Fast Track Guide and reference manual provided with the scanner. The IA-20 should not be used where: • the temperature exceeds 35ºC (95ºF) or falls below 10ºC (50ºF) •...
Page 8
Do not attempt to remove or insert the adapter while the scanner is operating. • If an adapter does not slide in smoothly, remove it from the adapter slot and try again. Do not use force. Nikon IX240 Film Adapter IA-20 Reference Manual...
To scan IX240 film, press the latch button to open the adapter cover. Latch button Nikon IX240 Film Adapter IA-20 Reference Manual...
Page 10
Note: If no operation is performed for several minutes, the film will automatically be wound back into the canister. Film will be fed into the scanner once more when the Nikon Scan scan window is opened or a preview or thumbnail scan is performed.
Nikon representative for information on replacement or repair. Do 5. Maintenance This chapter describes how to clean, store, and transport the IA-20. 5.1 Cleaning Before cleaning the adapter, remove it from the scanner. The exterior of the adapter is made of plastic, and should not be cleaned with volatile cleaners such as alcohol or paint thinner.
84.0 mm (W) 207.5 mm (D) (3.31 Approx. 270 g (9.6 oz.) 5 VDC, 1.7 A or less, supplied from scanner + 10ºC to +35ºC 20% to 85% (no condensation) IX240 Film Adapter IA-20 Reference Manual 58.5 mm (H)