Performing A Hard Reset - Alphasmart Dana Getting Started

• Use the tip of an unfolded paper clip (or similar object without a
sharp tip) to gently press the reset button inside the hole on the back
panel of Dana.

Performing a hard reset

Important: With a hard reset, all files, records and entries
1. While holding down the on/off key, use the tip of an unfolded
paper clip (or similar object without a sharp tip) to gently press
and release the reset button
2. Wait for the Palm logo to appear and release the on/off key.
3. A warning will appear that you are about to erase all the data
stored on Dana. Either press the up arrow key to complete the
hard reset, or press the memo key to perform a soft reset.
56 D a n a In -D ep th
stored in Dana are erased. Never perform a hard reset
unless a soft reset does not solve your problem. You
can restore any data previously synchronized with your
computer during the next HotSync operation.