Receiving Beamed Information; Beaming Your Business Card - Alphasmart Dana Getting Started

Receiving beamed information

1. Turn on Dana.
2. Point the IrDA port on the top of Dana at the sending IrDA port.
3. When the Beam Status dialog appears, tap Yes.

Beaming your business card

1. Create an Address Book entry with your business card informa-
tion.
2. Press the menu key.
3. Under Record, arrow to Select Business Card and press enter.
4. Press ctrl-cmd-y for the yes button.
5. Press the address key for about two seconds to beam your busi-
ness card.
Note: Once you complete steps 1 through 4, you do not need to
repeat this process. Simply press the address key for about
two seconds to beam your business card.
Beaming tips
• For best results, hold Dana and the other Dana, IrDA-equipped handheld
or printer between 4 and 39 inches apart, and keep the path between the
two devices clear of obstacles.
• Some applications are copy-protected and cannot be beamed. These are
listed with a lock icon next to them.
• You can set the full-screen pen stroke to beam the current entry. See the
Dana User's Guide for details.
Getting Started with Dana 51