Beaming Applications - Alphasmart Dana Getting Started

3. When the Beam Status dialog box appears, point the IrDA port
on the top of Dana at the receiving IrDA port.
4. Wait for the Beam Status dialog box to indicate the transfer is
done.
Note: You can also beam data by selecting the appropriate

Beaming applications

1. Press the apps key.
2. Press the send key.
3. Tap the Beam from pick list, and then select Handheld or Card.
To beam an application from a card, you must have a card
inserted into the expansion card slot.
4. Tap the application you want to transfer.
5. Tap Beam.
6. When the Beam Status dialog box appears, point the IrDA port
on the top of Dana at the receiving IrDA port.
7. Wait for the Beam Status dialog box to indicate the transfer is
done.
50 D a n a In -D ep th
beam command from the Record menu.