Two-Button Reset - Nikon D1 Manual

Two-Button Reset

Two-button reset restores camera and custom settings to their default values.
To reset camera settings, hold the
buttons down together for more than two seconds.
The following camera settings will be reset to their default values:
Setting
Image quality
Sensitivity
White balance
AF area mode
Focus area
Exposure mode
Flexible program
Shutter-speed lock
Aperture lock
Auto-exposure lock
Exposure compensation
Auto bracketing
Flash synchro mode
To reset custom settings for the current custom set (A or B) to their default
values, hold the and
seconds. The CUSTOM indicator in the rear control panel will start to blink.
Release both buttons while the indicator is blinking and then press the buttons
again. Both camera settings and custom settings for the current custom set
will be restored to their default values.
76
and
Default
Normal (color)
ISO 200 equivalent
A (auto white balance; manual white
balance adustment set to 0)
Single area AF
Center
Programmed auto
None
Off
Off
Off
0
Off
Front-curtain sync
buttons down together for more than two
Custom Settings: Two-Button Reset