Take A Photograph; Set The Advance Mode To S (Single Frame); Set Image Quality To Norm (Normal) - Nikon D1 Manual

6

Take a Photograph

This section describes how to take a photograph using the most
commonly-used settings.
6

.1 Set the advance mode to S (single frame)

Hold the mode dial lock-release down and turn the mode dial to S
(single frame). See "Camera Settings: The Mode Dial" for more
information.
6

.2 Set image quality to NORM (normal)

A
After turning the camera on, hold the
main command dial (B). The image-quality display in the rear control
panel (C) will cycle through the image-quality settings as shown below.
Stop when the display shows NORM (normal).
HI
See "Camera Settings: Image Quality" for more information.
14
B C
button down (A) and turn the
FINE NORM BASIC
First Steps: Take a Photograph