 Mixing of engine coolant (antifreeze) other than specified Organic Additive Technology (OAT) engine coolant (antifreeze), may result in engine damage and may decrease corrosion

protection. Organic Additive Technology (OAT) engine coolant is different and should not be mixed with Hybrid Organic Additive Technology (HOAT) engine coolant (antifreeze) or

any "globally compatible" coolant (antifreeze). If a non-OAT engine coolant (antifreeze) is introduced into the cooling system in an emergency, the cooling system will need to be

drained, flushed, and refilled with fresh OAT coolant (conforming to MS.90032), by an authorized dealer as soon as possible.

 Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not use additional rust inhibitors or antirust products, as they may not be compatible with the

radiator engine coolant and may plug the radiator.

 This vehicle has not been designed for use with propylene glycol-based engine coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze) is not recommended.

Fluid, Lubricant, or Genuine Part

We recommend using Mopar® API SP/GF-6A Certified SAE 5W-30 Full Synthetic Engine

Oil which meets the requirements of the manufacturer Material Standard MS-13340.

Equivalent full synthetic SAE 5W-30 API SP engine oil can be used but must have the

API Donut trademark

page 305.

Failure to use the recommended API SP/GF-6A or equivalent oil can cause engine

damage not covered by the vehicle warranty.

Minimum 95 Research Octane Number (RON).

CAUTION!

TECHNICAL SPECIFICATIONS

CAUTION!