Parts; Getting Going - Polar Electro Accurex Plus User Manual

IMPORTANT TO REMEMBER!
• Adjust the strap length snug enough and wet the Polar Coded
Transmitter electrodes to ensure flawless heart rate measurement.
• Do not stretch or bend the transmitter.
• Do not operate the buttons of the wrist receiver under water.
• Wash and dry the transmitter regularly after use; never store it wet.
• Keep the Polar Heart Rate Monitor out of extreme cold or heat.
The Polar Accurex Plus consists of three parts:
3. Polar Accurex Plus
wrist receiver
6

PARTS

1. Polar Coded Transmitter
Grooved electrode areas
2. Elastic strap

GETTING GOING

1. Attach the Polar Coded
Transmitter to the elastic strap.
2. Adjust the strap length to fit
snugly and comfortably. Secure
the strap around your chest,
below the chest muscles. Lock
the buckle.
3. Pull the transmitter off your
chest and wet the grooved
electrode areas on the back
of it.
4. Check that the wet electrode
areas are firmly against your
skin and the Polar logo is in a
central upright position.
5. Wear the wrist receiver as you would wear an ordinary watch.
Alternatively, if you go biking, you may attach the Wrist Receiver to
a Polar Bike Mount Polar Books and Accessories. Keep
the Wrist Receiver within the transmission range (1 metre / 3 feet).
7