Before Using For The First Time - Bosch CDG914X.1 User Manual And Installation Instructions

Table of Contents

Advertisement

en Before using for the first time
Rotate the steaming tray such that the latching
1.
cutout
​ ⁠ is towards the rear and its shape is point-
ing upwards.
Do not push the steaming tray beyond the recess
2.
​ ⁠ .
7  Before using for the first time
Configure the settings for initial start-up. Clean the appliance and accessories.
7.1 Before using for the first time
Before using the appliance for the first time, ask your
water supplier about the hardness of your tap water. To
ensure that the appliance can reliably remind you to
descale it when required, you must set your water hard-
ness range correctly.
ATTENTION!
If the wrong water hardness has been set, the appli-
ance cannot remind you to descale it at the right time.
Set the water hardness correctly.
Using unsuitable liquids may damage the appliance.
Do not use highly chlorinated tap water (>40 mg/l)
or other liquids.
Only use cold, fresh tap water, softened water or
non-carbonated mineral water.
Setting
1
0 (softened)
1 (soft)
2 (medium)
Only set this if you will be using solely softened water.
1
2
Also set for mineral water. Only use non-carbonated mineral water.
8
3.
6.3 Other accessories
You can purchase other accessories from our after-
sales service, specialist retailers or online.
You will find a comprehensive range of products for
your appliance in our brochures and online:
www.bosch-home.com
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance.
You can find out which accessories are available for
your appliance in our online shop or from our after-
sales service.
Notes
¡ If you are using mineral water, set the water hard-
¡ If your tap water is very hard, we recommend that
Water hardness in
mmol/l
-
Up to 1.5
1.5-2.5
Take hold of the steaming tray in the middle to in-
sert it.
ness range to "very hard". If you are using mineral
water, you must only use non-carbonated mineral
water.
you use softened water. If you are using only
softened water, set the "softened" water hardness
range.
German hardness °dH
-
Up to 8.4
8.4-14
French hardness °fH
-
Up to 15
15-25

Advertisement

Table of Contents
loading

Table of Contents