To set the timer, press the relevant time value on
2.
the display, e.g. minute display "m" or second dis-
play "s".
a The selected value is marked in blue.
Set the timer using the setting ring.
3.
If required, use
to reset the setting value.
To start the timer, press on the display.
4.
a The timer counts down.
a The timer remains visible on the display if the appli-
ance is switched off.
a When the appliance is switched on, the display
shows the settings for the current operation. The
timer is displayed in the status display.
a Once the timer has elapsed, a signal sounds. A no-
tification appears on the display confirming that the
timer has finished.
10 Dishes
You can use "Dishes" mode to very easily cook food.
The appliance will choose the optimal setting for you.
10.1 Setting a dish
Press "Dishes" in the menu.
1.
Press the required dish.
2.
a The settings for the dish appear on the display.
Adjust the settings if required.
3.
You can adjust only certain settings depending on
the dish.
For information about the accessory and shelf posi-
4.
tion, for example, press
Press
to start the operation.
5.
a Once the dish is ready, a signal sounds. The appli-
ance stops heating.
Once the cooking time has elapsed:
6.
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
10.2 Setting a later end time
You can set a later end time for certain dishes.
Requirements
¡ A dish is selected.
¡ Operation has not begun.
Press
.
1.
Use the setting ring to set the end time.
2.
Press
to start the operation.
3.
a The start time will appear on the display. The appli-
ance is in standby mode.
a Once the start time has been reached, the appli-
ance will start heating and the cooking time will start
counting down.
a Once the cooking time has elapsed, an audible sig-
nal will sound. The time shown on the display will be
zero.
Note: You cannot change the end time later on.
" Info".
to switch the ap-
Changing the timer
You can change the timer at any time.
If the timer is running in the background, use to
1.
select the timer beforehand.
Press .
2.
Change the timer using the setting ring.
3.
Press to confirm.
4.
Cancelling the timer
You can cancel the timer at any time.
If the timer is running in the background, use to
1.
select the timer beforehand.
Press .
2.
Reset the timer using
3.
Press to confirm.
4.
10.3 Extending the cooking time
For some dishes, the appliance allows you to extend
the cooking time once the set cooking time has
elapsed. You can do this as often as required.
Press "Extend cooking time".
1.
a A cooking time appears on the display.
If required, use the status bar to change the cook-
2.
ing time.
Press
to start the operation.
3.
a The appliance starts to heat and the time counts
down.
a When the time has elapsed, a signal sounds. The
appliance stops heating.
4.
Once the cooking time has elapsed:
Press
to end the signal tone early
‒
If you want to extend the cooking time again,
‒
press "Extend cooking time".
When the dish is ready, press
‒
pliance off.
10.4 Cancelling settings
The settings cannot be changed once cooking is in
progress.
To delete all settings, press
▶
ance off.
a All settings are now deleted. You can configure new
settings.
10.5 Overview of the dishes
You can find out which individual dishes are available
to you on the appliance when you call up the operating
mode.
The dishes are sorted by category and food.
¡ "Steamed chicken breast fillet"
¡ "Fish, whole, steam"
¡ "Fish fillet, fresh, steamed"
¡ "Mixed vegetables, frozen"
¡ "Unpeeled boiled potatoes, med."
¡ "Basmati rice"
¡ "Brown rice"
¡ "Couscous"
¡ "Steamed cauliflower florets"
Dishes en
.
to switch the ap-
to switch the appli-
13