Table of Contents
Advertisement
en Troubleshooting
Fitting the door panel
WARNING ‒ Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
Keep your hands away from the hinges.
▶
Components inside the appliance door may have sharp
edges.
Wear protective gloves.
▶
Note: You cannot use your appliance again until the
panel has been correctly fitted.
Open the appliance door fully.
1.
Refit the condensation trough. To do this, insert the
2.
condensate trough from above and rotate it down-
wards
.
Slide in the inner panel
3.
When doing this, ensure that the smooth, glossy
side of the panel is on the outside and the cut-outs
on the left and right are at the top.
The panel must be sitting correctly at the bottom in
the retainer.
16 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
If the appliance is defective, call Customer Service.
▶
22
.
Push the inner panel in at the top
4.
Put the cover back in place and press on it until you
5.
hear it click into place
Open the appliance door fully.
6.
Close the two locking levers on the left and right
7.
Close the appliance door.
8.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
Only use genuine spare parts when repairing the
▶
appliance.
If the power cord of this appliance is damaged, it
▶
must be replaced by trained specialist staff.
.
.
.
Advertisement
Table of Contents
