Table of Contents
Advertisement
7.6 Refilling the water tank
If the water tank runs dry during operation, steaming
will be paused.
Open the appliance door carefully.
1.
Remove the water tank from the tank recess.
2.
Fill the water tank with water.
3.
Slot the full water tank back into the water tank re-
4.
cess.
Close the appliance door.
5.
Press
to resume operation.
6.
7.7 Setting the heating function and
temperature
When you switch on your appliance, the display will
suggest a heating function and temperature. If you wish
to use the suggested setting, you can start the appli-
ance immediately by pressing . If you wish to use a
different setting, you will need to change the values.
Requirement: The water tank contains sufficient water.
Press
to switch the appliance on.
1.
To select a heating function, press the symbol for
2.
that heating function on the control panel.
a The temperature is highlighted on the display.
be lit on the control panel.
3.
Use the control ring to set the required temperature.
Press .
4.
a The appliance will now start.
7.8 "Fill water tank" message
If you select a heating function and the water tank is
only half full, the appliance will display the message
"Fill water tank".
If the water tank contains sufficient water for cooking,
start the appliance.
If the water tank does not contain sufficient water for
cooking, fill the water tank.
→ "Filling the water tank", Page 10
8 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
8.1 Overview of the time-setting options
You can set a cooking time and an end time on the ap-
pliance. When you set a time on the timer, the timer will
run independently of the appliance and will not inter-
vene in its operation.
Time-setting op-
Use
tion
Timer
When you set a time on the timer,
the timer will run independently of
the appliance and will not inter-
vene in its operation. It does not
affect the appliance.
7.9 Changing the temperature
After the appliance is switched on, the temperature set-
ting appears on the display.
Turn the control ring to set a different temperature.
▶
a The temperature is changed and applied immedi-
ately.
7.10 Changing heating functions
When you switch to a different heating function, the set-
tings will also be reset.
To switch to a different heating function, press
1.
pause operation.
Select a new heating function.
2.
The heating function and a temperature will appear
3.
on the display.
7.11 Cancelling operation
Note: You cannot abort the descaling process.
Press and hold the button until the appliance
▶
stops.
a The fan may continue to run after operation has
been paused or stopped.
will
7.12 After using the Steam function
When you use the appliance, moisture and food rem-
nants remain in the cooking compartment afterwards.
Dry and clean the appliance after each use. Empty the
water tank.
After using the Steam function
Dry the cooking compartment.
1.
→ "Drying the cooking compartment", Page 17
Empty the water tank.
2.
→ "Emptying the water tank", Page 17
Time-setting op-
tion
Cooking time
End time
8.2 Setting the timer
The timer runs independently of the appliance and
does not intervene in its operation. You can set the
timer to times of up to 23 hours and 59 minutes, re-
gardless of whether the appliance is on or off. The
Time-setting options en
Use
If you set a cooking time, the ap-
pliance will stop heating automat-
ically once this time has elapsed.
Along with the cooking time (dura-
tion), you can set the time at
which you want cooking to end.
The appliance will start up auto-
matically so that it finishes cook-
ing at the required time.
to
11
Advertisement
Table of Contents
