Attach Propellers - Inspired Flight IF1200 Setup Manual

8
ATTACH PROPS
STEP 1: Locate the correct propeller for each motor.
STEP 2: Three of the IF1200's motors spin clockwise, and have
black connecting points. The other threee motors spin
counterclockwise and have silver connecting points.
STEP 3: Attach the prop to the corresponding color of the connector
on the motor (Silver to silver, black to black).
STEP 4: Ensure the white dots line up with the corresponding motor,
place each propeller on its motor.
STEP 5: Make sure each propeller is fully seated, with the bottom of
the aluminum quick-disconnect parallel to the motor face.
STEP 6: Tighten the propellers on the motors to .9Nm using the
provided torque screwdriver.
STEP 7:
Twist screwdriver until you hear a loud click, ensuring the
propeller is securely mounted.
STEP 4 STEP 5 STEP 6
10