Ip Easy Setup - Netopia R3100-U User Reference Manual

IP Easy Setup

The IP Easy Setup screen is where you enter information about your Netopia Router's:
IP address
Subnet mask
Default gateway IP address
Domain name server IP address
IP address serving information, such as the number of client IP addresses and the 1st client address; and
You should consult with your network administrator to obtain the information you will need. For more information
about setting up IP, see
Ethernet IP Address:
Ethernet Subnet Mask:
Domain Name:
Primary Domain Name Server:
Secondary Domain Name Server:
Default IP Gateway:
IP Address Serving:
Number of Client IP Addresses:
1st Client Address:
PREVIOUS SCREEN
Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx).
Set up the basic IP & IPX attributes of your Netopia in this screen.
1. Select Ethernet IP Address and enter the first IP address from the IP address range your ISP has given
you. This will be the Netopia Router's IP address.
If Network Address Translation is enabled in the Easy Setup connection profile, the Ethernet IP Address
defaults to an address within a range reserved by the Internet address administration authority for use
within private networks, 192.168.1.1.
Because this is a private network address, it should never be directly connected to the Internet. Using NAT
for all your connection profiles will ensure this restriction. See
on page 11-1 of this guide for more information.
2. Select Ethernet Subnet Mask and enter the subnet mask your ISP has given you. The Ethernet Subnet
Mask defaults to a standard class C mask, 255.255.255.0.
3. Select Domain Name and enter the domain name your ISP has given you.
4. Select Primary Domain Name Server and enter the IP address your ISP has given you.
"IP Setup and Network Address Translation" on page
IP Easy Setup
11-1.
192.168.1.1
255.255.255.0
192.168.1.10
0.0.0.0
0.0.0.0
On
100
192.168.1.3
NEXT SCREEN
"IP Setup and Network Address Translation"
Easy Setup 7-9