Connecting Using Security Authentication - Netopia R3100-U User Reference Manual

Data Compression...
Send Authentication...
Send User Name:
Receive User Name:
Receive Password:
Channel Usage...
Bandwidth Allocation...
Maximum Packet Size:
In this Screen you will configure the PPP/MP specific connection params.
2. Select Send Authentication and press Return. From the pop-up menu, highlight PAP-TOKEN or
CACHE-TOKEN. Your network administrator or the remote network administrator will tell you which method
to select.
If you select PAP-TOKEN, select Send User Name and enter a name for your Netopia R3100. You will not
need to enter a Send Password for PAP-TOKEN. Press Return.
If you select CACHE-TOKEN, select Send User Name and enter a name for your Netopia R3100. Then,
select Send Password and enter a secret name or number. Press Return.
3. Set up a connection profile to use with your authentication method. For information on setting up a
connection profile, see
Note: If you are setting up your first connection profile, you can also enter your authentication information in
the Easy Setup Connection Profile screen.

Connecting using security authentication

You can initiate a connection call using security authentication in either of two ways:
establish a dial-on-demand (DOD) connection, or
establish a manual connection.
Establishing a dial-on-demand (DOD) connection call
To establish a connection call using DOD, select Utilities & Diagnostics from the Main Menu and press Return.
Note: The Secure Authentication Monitor field will remain hidden if PAP-TOKEN or CACHE-TOKEN is not the
selected authentication method in the connection profile.
Datalink (PPP/MP) Options
Chapter 7, "Easy Setup."
Ascend LZS
PAP-TOKEN
Dynamic
Auto
1500
Security 15-39