Page 1
WO98/36395, DE 100 25 561, DE 101 50 128, WO 2004/051591, DE 103 01 678 A1, DE 10309334, WO 04/109236, WO 05/096482, WO 02/095707, US 6,747,573, US 7,019,241 EnOcean GmbH Phone +49.89.67 34 689-0 Subject to modifications Kolpingring 18a +49.89.67 34 689-50 STM 31x / STM 31xC User Manual V1.01...
Page 2
This information describes the type of component and shall not be considered as assured characteris- tics. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the EnOcean web- site: http://www.enocean.com.
GENERAL DESCRIPTION Basic functionality The extremely power saving RF transmitter module STM 31x of EnOcean enables the realization of a wide range of wireless and maintenance free sen- sors such as temperature sensors, humidity sen- sors, or room operating panels.
(EnOcean Equipment Profile) device. This feature is needed for “automatic” interoperability of sensors and actuators or bus systems. Unique manufacturer IDs are distri- buted by the EnOcean Alliance. The interface is shown in the figure below: Reset PROG_EN USB <= > SPI...
USER MANUAL V1.01 STM 31X / STM 31XC EnOcean provides EOPx (EnOcean Programmer, a command line program) and Dolphin Studio (Windows application for chip configuration, programming, and testing) and the USB/SPI programmer device as part of the EDK 300 developer´s kit.
With this special teach-in telegram it is possible to identify the manufacturer of a device and the function and type of a device. There is a list available from the EnOcean Alliance describing the functionalities of the respective products.
STM 312 provides solder pads for ECT 310 or for a battery holder for CR16xx batteries. ECT 310 is a low-cost ultra-low-voltage DC/DC converter for powering battery-less EnOcean radio modules by thermal energy. Operation starts at typ. 20 mV relating to a 2 K tempera- ture difference at a standard low-cost Peltier element.
False ceilings with panels of metal or carbon fiber Lead glass or glass with metal coating, steel furniture The distance between EnOcean receivers and other transmitting devices such as comput- ers, audio and video equipment that also emit high-frequency signals should be at least 0.5 A summarized application note to determine the transmission range within buildings is available as download from www.enocean.com.
The conformity has been proven and the ac- cording documentation has been deposited at EnOcean. The modules can be operated with- out notification and free of charge in the area of the European Union and in Switzerland.
United States without additional Part 15 FCC approval (ap- proval(s) for unintentional radiators may be required for the OEM’s finished product), under EnOcean’s FCC ID number. This greatly simplifies and shortens the design cycle and devel- opment costs for OEM integrators.
Page 31
STM 31X / STM 31XC OEM Requirements In order to use EnOcean’s FCC ID number, the OEM must ensure that the following condi- tions are met. End users of products, which contain the module, must not have the ability to alter the firmware that governs the operation of the module.
Pre-installed helical antenna -9 dBi IC (Industry Canada) certification In order to use EnOcean’s IC number, the OEM must ensure that the following conditions are met: Labeling requirements for Industry Canada are similar to those required by the FCC. The Original Equipment Manufacturer (OEM) must ensure that IC labeling requirements are met.
Need help?
Do you have a question about the STM 31 Series and is the answer not in the manual?
Questions and answers